Microphone and Loudspeaker

The Loudspeaker and Microphone dialog contains the basic microphone and loudspeaker settings.

Notes:

Click on the More button to display all options of the dialog.
This feature is not available for Web and Basic models.

Microphone

Activate the microphone.
Select one of the following options:
- Low sensitivity: setting for short distances
- High sensitivity: Setting for longer distances. When you select this setting, background noise may occur.
Click on the Test button to check your setting. In order to perform this check, the loudspeaker must be activated.

Speaker

Activate the loudspeaker.
Activate or deactivate the speaker and set the amplification.
Value range: -30 .. 0 .. 30
In order to check your settings, select one of the audio files and click on the Test button.

Deactivating the Microphone

Deactivating a camera's microphone may become necessary in order to protect the privacy or for other reasons. You can now permanently and irreversibly deactivate the microphone in the Loudspeaker and Microphone dialog.

Click on the More button.
Click on the disable link that appears in the first paragraph of the explanation.
Follow the instructions in the Permanently Disable the Camera Microphone section.

Attention:	*This deactivation is permanent and removes all* functions that involve the microphone and cannot be reversed even by MOBOTIX engineers.**

Storing the Configuration

Click on the Set button to activate your settings and to save them until the camera is rebooted.

Click on the Close button to close the dialog. While closing the dialog, the system checks the entire configuration for changes. If changes are detected, you will be asked if you would like to store the entire configuration permanently.